Quality

How to read
a peptide COA.

A certificate is only as good as its weakest field. Eight things to check, in the order that catches problems fastest.

Short answerQuality · 6 min read · Updated 17 Nov 2026

Start with the batch number: if it doesn't match the vial, stop. Then check identity (mass spectrometry: observed mass close to expected), purity (HPLC percentage with the chromatogram shown), the testing laboratory and its accreditation, and the test date. Net peptide content and endotoxin are the next level. A purity number alone, without identity, method or lab, tells you very little.

01An annotated certificate

Certificate of AnalysisBatch SAMPLE-1
ProductBPC-157 (sample)
SequenceGEPPPGKPADDAGLV
Gross weight5 mg
Test date04 Nov 2026
Identity · ESI-MS1419.5 Da observed · 1419.6 expected
Purity · RP-HPLC 214 nm99.1%
Net peptide content82%
Endotoxin · LAL< 0.5 EU/mg
Tested by: [Independent lab] · ISO/IEC 17025Approved: analyst ID · doc 6A-COA-2611-01
  1. Batch number: must match your vial.
  2. Identity: observed vs expected mass.
  3. Purity: percentage with the trace.
  4. Laboratory and accreditation.
  5. Test date for this lot.
  6. Net peptide content.
  7. Endotoxin result.
  8. Approval and document number.

Illustrative sample. Real certificates are linked from each batch in the Batch COA lookup.

02Check it in this order

The first three checks catch most problems in under a minute.

1
Batch number matches the vial

The certificate describes one lot. If the number differs from your label, the document isn't about your vial.

2
Identity by mass spectrometry

Observed mass should match the expected mass for the sequence within the method's tolerance. HPLC alone cannot confirm identity.

3
Purity by HPLC, with the trace

A percentage plus the chromatogram. One dominant peak and small side peaks is what you want to see.

4
Who tested it

A named laboratory, ideally independent and accredited to ISO/IEC 17025 for the methods used.

5
When it was tested

A date close to manufacture, not a years-old file reused across lots.

6
Net peptide content

How much of the powder's weight is peptide rather than water and counter-ions. Often 60–90%.

7
Endotoxin

Reported as EU per mg. Relevant to many cell-based and in-vivo research models.

8
Signature and traceability

An analyst or approver, a document number, and a way to verify it with the lab.

03Red flags

  • No batch number, or the same batch number on every product.
  • Identical purity and dates across different compounds.
  • A purity figure with no chromatogram and no method.
  • No mass-spectrometry identity result.
  • The vendor's own name in the “testing laboratory” field.
  • A lab you cannot find, or that does not list the method in its accreditation.

04What a COA cannot tell you

A certificate describes the sample that was tested. It cannot prove that your vial was stored correctly in transit, that it came from the same lot, or that a reconstituted solution is still stable. That is why batch matching and independent retesting matter.

It also says nothing about whether a substance is safe or effective in people. Quality and efficacy are different questions.

RefSources

  1. LifeTein. What is peptide purity? Technical note. lifetein.com/What-is-peptide-purity.html
  2. Aladdin Scientific. Determination of peptide purity (FAQ). Technical FAQ. www.aladdinsci.com/us_en/faqs/determination-of-peptide%20-p…
  3. AmbioPharm. What is net peptide content? Technical FAQ. www.ambiopharm.com/?p=10700
  4. ISO. ISO/IEC 17025: General requirements for the competence of testing and calibration laboratories. Standard. www.iso.org/ISO-IEC-17025-testing-and-calibration-laborator…

Plain-English summary of public sources, not legal or medical advice. Last checked 17 Nov 2026.

Questions

What purity is good enough?

For most research applications, 98% or higher by HPLC is a common specification. Purity without identity is not meaningful, so read both.

Can I verify a 6AM certificate?

Yes. Enter the batch number in the Batch COA lookup, and contact the named laboratory if you want to confirm the document.

Evidence before hype.

One email a week: new research explained and regulatory changes. No prices, no hype.

Get the 6:00 brief

Free. Unsubscribe any time.

Written by 6AM Research. Drafted from primary sources; every claim links to its source, and the page is dated. Editorial policy · How we check every page
Every batch has a public lab report. Look it up by the batch number on the vial. Batch COA lookup